SALCON II SALT CONCENTRATION METER KIT

Cells - Electrodes, Conductivity & Salt Testing, EDT

The SALCON II model is a robust direct reading instrument designed for use in the field or workshop/Laboratory to provide a direct % Chloride or % Salt content in Wash solutions, food and industrial products . The meter has a built in correction allowing for the use of Tap water as the blank solution by correcting automatically for its inherent conductivity.

British and European Standards.

Water soluble Chloride ion content requirements can be summarised in the European and British Standards BS EN 12620 and BS EN 206-1.

BS EN 206-1 defines the chloride class depending on the type of reinforcing to be used. The class specifies the maximum Chloride content in concrete by mass of cement from the total contribution of all the constituents.

The EDT SALCON II meter is designed to assist in the monitoring and management of the Chloride marine aggregate producers’ factory control procedures as required by BS EN 12620

The Meter has a Rubber protective boot and tough carry case included as standard.

SALCON II SALT CONCENTRATION METER KIT

The SALCON II model is a robust direct reading instrument designed for use in the field or workshop/Laboratory to provide a direct % Chloride or % Salt content in Wash solutions, food and industrial products . The meter has a built in correction allowing for the use of Tap water as the blank solution by correcting automatically for its inherent conductivity.

British and European Standards.

Water soluble Chloride ion content requirements can be summarised in the European and British Standards BS EN 12620 and BS EN 206-1.

BS EN 206-1 defines the chloride class depending on the type of reinforcing to be used. The class specifies the maximum Chloride content in concrete by mass of cement from the total contribution of all the constituents.

The EDT SALCON II meter is designed to assist in the monitoring and management of the Chloride marine aggregate producers’ factory control procedures as required by BS EN 12620

The Meter has a Rubber protective boot and tough carry case included as standard.

Description

Features include:

  • Direct Concentration Readout down to 0.001% Chloride  (Reads % Salt to 0.001% NaCl) 
  • Automatic correction for Tap Water (Blank correction)
  •      Auto Endpoint
  • Results storage in the Internal memory
  • Backlit display with Brightness and contrast control.
  • Automatic Temperature Correction (ATC)
  • Automatic Calibration using actual NaCl conductivity data.*
  • Portable with a 200 hour continuous battery life**

      The SALCON II Kit includes the Meter, RB400 Rubber Boot, E5019 Rugged Conductivity Cell, 4 x AA Batteries, 2 x 100ml Bottle, 500ml Salcon II Standard Solution.

Reviews

There are no reviews yet.

Be the first to review “SALCON II SALT CONCENTRATION METER KIT”

Your email address will not be published. Required fields are marked *